SWMU 24 – Oil Spill Oil/Water Separator and Adjoining Pad

SWMU 24 consists of an in-ground, concrete, oil/water separator. It serves as the second stage separator of bilge and ballast water and marine oil/fuel spills. This SWMU is surrounded by asphalt paving on three sides, with bare ground on one side. Staining of the asphalt was observed during the 1993 follow-up inspection. Also, during the 1993 follow-up inspection, a bermed pad, with heavy oil staining, was identified as part of this SWMU. An RFI for soils was required for this SWMU in the permit.

Status

• RFI work plans were approved in 1995.
• Investigations at this unit (a part of OU 1) were performed in accordance with the approved RFI work plans.
• No evidence of release was seen.
• No further action was recommended in the 7003 Administrative Order on Consent.
• Corrective Action Complete without Controls as stated in the 1/29/07 RCRA § 7003 Administrative Order on Consent.